The NUX MOD CORE DELUXE MKII is a modulation pedal with 8 different types including ST.CH (Stereo Chorus), CE-1, SCF CHO, SCF FLG, SCF P.M., U-VIBE CHO, U-VIBE VIB and PH-100. You can switch the mod types by way of the Type rotary switch.


This pedal offers advanced signal routing with the included Send and Return. Easily split the mono signal to create customized effect loops! Additionally, you can parallel the 2 signals, and use the Tweak knob in Alt mode to blend the signals. Use the 3-way toggle switch to the desired position, and you are good to go. Keep reading below for more signal routing ideas

An Intuitive User Interface

I/O Jacks

DC jack

Use ONLY: 9V Negative Tip power with more than 150mA. (The power consumption is less than 110mA.)


USB-C port

The USB-C port is for firmware updates. Connect a USB cable to your PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can do firmware updates using DFU updater software.

Download the related firmware and firmware update guide from product page.


In jack

The audio inputs on the right side of this pedal are standard 1/4" jacks (mono/TS). Connect your guitar to the In (mono) audio input on the right side of your pedal using a regular 1/4" instrument cable.


Return jack

In advanced routing, connect Pre-effects like OD/Dist output to the Return jack.


Out jacks

Normal routing:

The audio outputs on the left side of this pedal are standard 1/4" jacks (mono/TS). Connect the audio output of Out1 to the next device in the signal chain, either with a single cable or with a pair of 1/4" cables if both Out1 and Out2 are being used.


Advanced routing:

Out1 sends the modulation effect out. Send out sends the loop signal out.

Connections

1. Normal routing: (In this connection, the toggle switch has no function.)

2. Advanced routing: (You can assign PRE, // PARALLEL, POST through the toggle switch.)

In the amp’s FX loop.

Features

8 modulation types in a compact enclosure.
ST.CH (Stereo Chorus), CE-1, SCF CHO, SCF FLG, SCF P.M., U-VIBE CHO, U-VIBE VIB and PH-100.
ST.CH is based on MXR Stereo Chorus.
CE-1 is based on BOSS CE-1.
SCF is based on TC Electronic SCF Stereo Chorus Flanger.
U-VIBE is based on Dunlop UV-1 Uni-Vibe Chorus / Vibrato.
PH-100 is based on MXR Phase 100.
Normal routing(mono out or stereo out) and advanced routing(PRE, // , POST).
Parallel routing offers Blend parameter.(Alt mode, Tweak becomes Blend parameter.)
Smart Tap Tempo. (50~200 BPM)
Low power consumption. (less than 120mA)
Analog dry signal for low noise and zero latency.

Specifications

Input Impedance: 1M
Output Impedance: 1k
Dynamic Range: 104 dB
DSP Processing: 48KHz / 32-bit
A/D D/A Sampling Rate: 48KHz / 24-bit
Power: 9V DC(Negative tip, Optional ACD-006A adapter)
Current Drawess than 120mA
Dimensions: 122(L) X 72(W) X 47(H)mm
Weight: 270g